Size Reduction Equipment

Mill / Grind / Impact / Reduce / Crush / Deagglomerate / Jet Mill / Micronize / Pulverize / Hog

Medium Fine Grind Hammer Mills

Infeed that fractures if impacted; average feed size 2"-3"; average discharge size 1/4" to 60 mesh.

Vertical Wood Hog

Infeed that fractures if impacted. Average size 1" to 6"; average discharge 3" to 1/2"

Low Speed High Torque Shredder

Top hopper feed. Infeed that cuts or shreds on impact. Average feed size 2" - 6" x 48"; average discharge 3" to 1/2"

Horizontal Wood Hog (Auto Feed Roll)

Infeed that fractures if impacted; Average feed size 6"x6"x96"; average discharge 4" - 3/4"

Low Speed Horizontal Shredder

Infeed that cuts or shreds on impact. Average feed size 2" - 1/2"x3" to 4"x4"x72"; average discharge size 3" to 1/2"

Granulators (Knife Type)

In feed that shears; average feed size 36"x48" to 1/2"; average discharge size 2" - 10 mesh

Crushers, Delumpers & Lump Abraders

In feed that shatters by impact or pressure

High Torque Shredders

In feed that shears

Breaker

In feed that is sticky or shatters

Roller Mills

In feed that shatters with pressure and shears

Cone Mills

In feed that is friable and non-abrasive

Hammer Mills (Dual Screen Type)

In feed that fractures on impact

Classifier Mill (Vertical Shaft)

In feed that fractures on impact

Micronizer Air Jet Mill

In feed that fractures on impact

Pellet Crumbler

In feed that shatters with pressure and shears

Simpactor Pin Mill

In feed that fractures on impact

Pin Mill

In feed that fractures on impact

Classifier Mill (Horizontal Shaft)

In feed that fractures on impact

Granulators

In feed that shears with dusting

Sheet Granulator

In feed that shatters or shears